Dongguan Chang'an Tiannuo Electronic Material Operation Dept

-r:.-:.-rr:.;-r:.;-:.-r:.;-:r;-:-:;-:r
:'';; -:.:.High-quality organic glass sticker glue grams
-:'';;-:.:.:
-:'';;-:.:.
Product description:< br/> This product is an ultraviolet curing glue that is cured by ultraviolet radiation with a wavelength of ~. Mainly used for bonding plastic to plastic, plastic to glass, plastic to metal, plastic to other materials. Mainly aimed at the self-adhesion and mutual adhesion of plastics in the handicraft industry. The main plastics to be bonded are: (acrylic, plexiglass), B, B, B, and other thermoplastics.
1. Product features:
General-purpose products have a wide range of applications and have excellent bonding effects between plastics and various materials.
The flexible formula will not cause internal stress cracking after curing and has excellent low temperature, high temperature and high humidity resistance.
The curing speed is fast and it takes a few seconds to position to reach the highest strength, which greatly improves work efficiency.
After curing, the completely transparent product will not yellow or whiten for a long time. Compared with traditional instant adhesive bonding, it has the advantages of resistance to ring testing, no whitening, and good flexibility.
2. Technical parameters:
Test items
Appearance of transparent liquid
Viscosity.
Positioning time
Curing energy/
Acrylic to acrylic: Tensile strength＞
Acrylic bonded to glass: Tensile strength＞
Acrylic bonded to metal: Tensile strength＞
Hardening (Shao)＞
High transparency after curing
3. Usage:
Steps: Clean the surface of the material. If there is water or detergent remaining on the surface before it is dry, you need to blow it dry or wipe it dry or wait for it to dry completely before dispensing glue.
Step 1: Dot (pour) the glue evenly on one of the plastic surfaces. Put another piece of plastic (or other material) lightly on the glue and squeeze it hard to expel the bubbles and make the glue flow level. Make sure that the bonding parts are covered with glue and fix the position.
Step 1: Use a cloth or paper towel to wipe away the excess glue spilled around the plastic. Try not to expose the glue to UV rays before this step. Do not use wet cloth, wet paper, or liquid (such as glass water, water, alcohol and other solvents) to clean the glue spill around the plastic before the glue is completely cured.
Steps: Use ultraviolet light with a wavelength of nanometers to irradiate until the glue layer has been fully cured. When irradiating, keep the UV lamp as close to the glue as possible to speed up the curing speed.
After step, UV irradiation and curing. If there is still glue overflow around the plastic, you can use a blade to scrape it off.
4. Notes:
The ideal thickness of the adhesive layer when bonding is -. Too thin or too thick will affect the bonding performance.
Make sure that the adhesive layer absorbs sufficient UV energy to achieve the best curing effect, otherwise it will easily affect the bonding performance of the adhesive layer.
Do not move the material back and forth when exposed to ultraviolet rays, otherwise it will easily cause the glue layer to turn white and the bonding strength to decrease.
. Remaining glue should not be returned to the original packaging. It should be stored at room temperature, protected from light, and kept out of reach of children.
5. Store in a dark, sealed, ventilated, and cool condition. The ideal storage temperature is -℃.
Validity period: year