Dongguan Chang'an Tiannuo Electronic Material Operation Dept

:'';;br;br;-' ';b;-:.:.Product name
-:'';;br;br;-' ';-:.:.: Plastic adhesive for medical supplies
:'';;br;br;-' ';b;-:.:.Model number
-:'';;br;br;-' ';- :.:.：
:'';;br;br;-' ';b;-:.:.Use parts
-:'';;br;br;-' ';- :.:.: Respiratory masks, laryngeal masks, disposable medical needles, medical plastic tubes, and medical supplies industry. Glass furniture
:'';;br;br;-' ';-:.:., glass dining table, glass coffee table, lighting manufacturing and other products glass and metal bonding.
:'';;br;br;-' ';b;-:.:.Color
-:'';;br;br;-' ';-:.:.Amber Transparency
:'';;br;br;-' ';b;-:.:.Viscosity
-:'';;br;br;-' ';-:.:.~ .
:'';;br;br;-' ';b;-:.:.Hardness
-:'';;br;br;-' ';-:.:.：
:'';;br;br;-' ';b;-:.:.Transparency after curing
-:'';;br;br;-' ';-:.:. ：Highly transparent
:'';;br;br;-' ';b;-:.:. Whether it is adjustable
-:'';;br;br;-' ';-: .:.Our products can be customized according to customer requirements (viscosity, color, hardness, and curing time can all be adjusted)
:'';;br;br;-' ';b;-:.:. Plastic adhesive for medical supplies
-:'';;br;br;-' ';b;-:.:.Product features:
:'';;br;br;-' ' ;-:.:., passed class b certification and b biocompatibility test.
:'';;br;br;-' ';-:.:., high bonding strength, maintaining high strength for a long time without attenuation after curing.
:'';;br;br;-' ';-:.:. The flexible formula has excellent bending resistance, impact resistance and vibration resistance.
:'';;br;br;-' ';-:.:., low odor, low corrosion, moderate viscosity, can be used for manual or dispensing machine application.
:'';;br;br;-' ';b;-:.:. How to use the product:
:'';;br;br;-' ';-:.:. . Clean the plastic surface. If there is water or detergent residue on the glass surface after cleaning, it needs to be blown or wiped dry or wait until it is completely dry before dispensing glue.
:'';;br;br;-' ';-:.:.. Dot (pour) the glue evenly on one of the plastic surfaces. Put another piece of plastic (or other material) lightly on the glue and squeeze it hard to expel the bubbles and make the glue flow level. Make sure that the bonding parts are covered with glue and fix the position.
:'';;br;br;-' ';-:.:. Use a cloth or paper towel to wipe away the excess glue spilled around the plastic. Try not to expose the glue to UV rays before this step. Do not use wet cloth, wet paper, or liquid (such as glass water, water, alcohol and other solvents) to clean the glue spill around the plastic before the glue is completely cured.
:'';;br;br;-' ';-:.:., irradiate with ultraviolet lamp with a wavelength of br nanometers until the glue layer has been fully cured. When irradiating, keep the UV lamp as close to the glue as possible to speed up the curing speed.
:'';;br;br;-' ';-:.:., after UV irradiation and curing. If there is still glue overflow around the plastic, you can use a blade to scrape it off.
:'';;br;br;-' ';b;-:.:. Precautions for use:
:'';;br;br;-' ';r;-:. :. The ideal adhesive layer thickness during bonding is br.-. Too thin or too thick will affect the bonding performance.
:'';;br;br;-' ';r;-:.:., Make sure the adhesive layer absorbs sufficient UV energy to achieve the best curing effect, otherwise it will easily affect the bonding performance of the adhesive layer.
:'';;br;br;-' ';r;-:.:. Do not move the material back and forth when exposed to ultraviolet rays, otherwise it will easily cause the glue layer to turn white and reduce the bonding strength.
:'';;br;br;-' ';r;-:.:.. Do not return the remaining glue to the original packaging. It should be stored at room temperature, protected from light, and kept out of the reach of children.