Dongguan Chang'an Tiannuo Electronic Material Operation Dept

Glass adhesive aluminum cake extremely sticky glue water electronic scale assembly aluminum cake adhesive glass
1. Product features:
Electronic health scale glass panel adhesive is a one-component high-strength UV-curable adhesive A variety of metals such as stainless steel, aluminum alloys, electroplated surfaces, special glass and other low surface energy inorganic materials have extremely high adhesion; after solidification, continuous impact force knocking on the aluminum or stainless steel sheet can cause the entire sheet to deform and bend, and can withstand high frequency vibration; the flexibility-enhanced formula remains highly stable especially in high-humidity and heat environments; it is significantly more transparent than ordinary glue and the product does not yellow or whiten for a long time after curing; it has excellent low-temperature, high-temperature and high-humidity resistance.
2. Typical uses:
Specially used for bonding and assembly of glass panels of health scales (electronic scales).
3. Technical parameters:
Test items
Appearance & Transparent Liquid
Viscosity.&
Density ℃/&;.
Hardness Shore&&;
Tensile strength
Elongation at break %
Glass transition temperature ℃
Shear strength glass/aluminum sheet
Applicable temperature range ℃-~
4. Curing And positioning:
Lamp intensity () (medium pressure mercury lamp)
Positioning time ()-
Curing time ()-
5. How to use
. Will be used later Perform general cleaning and drying on the gluing work surface
. Squeeze the glue onto the cleaned substrate surface to distribute it evenly. Close the two planes and irradiate them with an ultraviolet lamp with a wavelength of 500 Å to confirm that the ultraviolet rays can penetrate to the bonded part. The curing time is - times the fixed time under the same ultraviolet light intensity to ensure that the adhesive is completely cured.
.The curing speed of this product depends on the intensity of ultraviolet light, the distance between the light source and the adhesive layer, the required curing depth or the gap between the adhesive layers, and the light transmittance of the substrate.
.The unused glue should be tightly capped immediately and sealed for storage. This product is sensitive to UV rays. During storage and operation, exposure to sunlight, ultraviolet rays and artificial light sources should be avoided as much as possible. This product should be applied with a dispensing machine with a black feed tube.
． Complete curing of surfaces exposed to air requires a minimum of relatively high UV light intensity/or wavelength of UV light.
6. Precautions:
. Store away from children.
.Do not pour the poured glue back into the original packaging to avoid contaminating the glue.
.This product contains methacrylic acid and its ester monomers, which are slightly irritating to the skin and eyes. If it accidentally splashes into your eyes, please rinse immediately with plenty of water. If you still feel unwell, you must go to the hospital for examination; after skin contact, please Rinse immediately with soap and plenty of water.
7. Packaging specifications: g/bottle, kilogram/bottle.
8. Storage and transportation:
This product needs to be stored in a cool, dry environment below ℃ to avoid exposure to ultraviolet rays or sunlight, otherwise polymerization will occur. The storage period is one month.
Such products are non-dangerous goods and can be transported as general chemicals. Be careful and leak during transportation!